Installing lighting in your home can add a lot of character and personality to bedrooms, kitchens, or any other room in the house. But what type of lighting should you install? For most people, the answer is LEDs. They are cheap to buy and have a long lifespan, which means they won’t need replacing for a while. Additionally, they don’t give off as much heat as incandescent or halogen bulbs, meaning they are safer to have around if there are kids or pets in the house. However, this does not mean that LEDs are perfect for every person. Some people may find that after having them installed for some time, the color starts to irritate them. Others might find that having such bright lights on all day is stressful and ruins their night vision when going to sleep at night. If you fall into either group of people (or somewhere in between), then it might be time to take those LED lights from the wall and store them somewhere else! Here are 14 tips on how you can do that:
How To Take Led Lights Off The Wall
Decide Where You Want To Store Them
One of the first things you will need to do is figure out where you want to store your lights. There are plenty of options to choose from depending on where you want your lights to go. Some examples include: – Attics – people often store old furniture and boxes in attics, but if you don’t have any, you can still put your lights up there as long as you make sure they are safe from water damage and rodents. – Garage – if you have a detached garage, you can use it to store your lights out of the way until you need them again. Just make sure that the lights are high enough off the ground so that children and pets can’t reach them. – Basement – if you want to store your lights in the basement, make sure you put them on a high shelf so that children and pets can’t reach them.
Mark The Area That Will Be Cut Out
The first thing to do is mark the area on the wall that will be cut out. You will have to measure and mark the area so that it will match the size of your light fixture and the area where the wires are coming out of the wall. The goal here is to create a small hole in the wall where you can tuck the wires away.
Mark Where The New Wall Anchors Will Go
Next, you need to mark where the new wall anchors will go. These are the small plastic brackets that will hold the light fixture in place and keep it from falling down. You will need two of these per light, so make sure you mark both of them so that you know which one is for each anchor.
Cut The Wall Anchors Out
The new anchors you install are not completely permanent. They are more like temporary brackets, so all you have to do is unscrew the old anchors and then remove them when you are finished. When installing these new anchors, make sure that they face the right direction and that they are as close to flush with the wall as possible. The new anchors will need to be able to fit over the wires coming out of your light fixture if you want them to stick well. You can use a hand or power drill if it is easier for you, but if you don’t have one, then any small screwdriver should work just fine.
Make Sure You Have The Right Tools
Before you attempt to take your lights off the wall, make sure you have all of the right tools. This includes a screwdriver, pliers, a measuring tape, and a pencil that you can use to mark the spots where you need to put the wall anchors and cut out the wall.
Install The Wall Anchors
Once you have marked where the wall anchors go, the next step is to install them. Simply screw them into the wall so that they are flush with the wall. Be sure not to put them too close to any electrical cables in the wall, as this can cause a fire.
Remove The Light From The Wall
Now it is time to remove the light from the wall. First, unplug the light fixture so that you don’t get shocked while working on it. Next, find the screws that are holding the light to the wall and unscrew them. Finally, gently pull the light off the wall and put it down on the floor.
Cut Out The Middle Piece Of the Wall
Now that the light is off the wall, it is time to cut out the middle piece of the wall. A good rule of thumb is to cut out the wall until it is about 1 inch away from the edge of the light. This will make it easier to slide the wires into the wall and make them look clean.
Replace Your Old Light Fixture With A New One
Now that you have your wires hidden in the wall, it is time to replace your old light fixture with a new one. First, carefully pull the wires out of the wall so that they are not twisted or tangled. Then, plug the wires into the new light fixture so that they are not loose. Finally, screw the light fixture onto the wall, and you are done!
Conclusion
LED lights are great for many people, but not all. If you are finding that they are too bright or are causing you to have night blindness, then it might be time to remove them from the wall and store them somewhere else. When you want to put them back up, make sure you find a new place for them and take the necessary precautions before beginning your installation so that you don’t get hurt.
FAQ:
Q: How do I know if I need to replace my light?
A: If you are having trouble seeing at night, or if your light is flickering, then it might be time to replace your light.
Q: How do I remove the old light?
A: First, unplug the power cord from the wall. Next, find the screws that are holding your old light to the wall and unscrew them. Finally, gently pull the old light off of the wall and put it down on the floor.
Q: How do I install a new one?
A: First, carefully pull out all of your wires from the old fixture so that they are not tangled or twisted. Next, plug in all of your wires into a new fixture so that they are not loose. Finally, screw in your new fixture onto the wall and you are done!
Q: How do I know if I need to replace my light?
A: If you are having trouble seeing at night, or if your light is flickering, then it might be time to replace your light.
Q: How do I remove the old light?
A: First, unplug the power cord from the wall. Next, find the screws that are holding your old light to the wall and unscrew them. Finally, gently pull the old light off of the wall and put it down on the floor.
